FASV115-1 Air-Saver Motorized Ball Valves 115 VAC 1″NPT
The AIR-SAVER 1” is installed in the compressed air line after the air receiver. The AIR-SAVER 1” opens and closes the air supply to the factory, based on customer specific working shifts. A typical compressed air system has air loss through pipe work connections, leaking float type drains, etc.
Part No.: FASV115-1
115 VAC
1″ NPT Inlet & Outlet
230 PSI Max Pressure
Your Price:
$0.00
Available on backorder
- Pictures shown are for illustration purposes only. Actual product may vary due to product specifications.
- All prices on this website are subject to change without notice. Whilst we make every effort to provide you with the most accurate, up-to-date information, occasionally, one or more items on our website may be mis-priced. In the event a product is listed at an incorrect price due to typographical, photographic, or technical error or error in pricing information received from our manufacturers, Air Power Equipment Co. shall have the right to refuse or cancel any orders placed for product listed at the incorrect price.
Part No.: FASV115-1
115 VAC
1″ NPT Inlet & Outlet
230 PSI Max Pressure
The AIR-SAVER 1” is installed in the compressed air line after the air receiver. The AIR-SAVER 1” opens and closes the air supply to the factory, based on customer specific working shifts. A typical compressed air system has air loss through pipe work connections, leaking float type drains, etc.
The AIR-SAVER 1” will open the ball valve at the beginning of a working shift and close the ball valve when the working shift is over. From that point on, all compressed air will remain in the air receiver until the next working shift, rather than being lost through leakages. The clever and versatile programming feature allows for customer specific settings and is totally adaptable to the working hours of each individual factory. The AIR-SAVER 1” can be installed in all pipe line systems up to 2”. Remote switching kits are available to operate the AIR-SAVER 1” from a distance.
• At least one air receiver’s worth of compressed air savings per day
• No unnecessary compressor start-up during periods when compressed air is not required
• Compressor, dryer and filter activities are reduced during factory closing hours Possibility to shut of parts of the pipe line system where compressed air is not needed continuously
• Language selection feature (English, German, Spanish, French and Dutch)
• Each individual day can be programmed according to specific working day shift requirements Time programmed or remote controlled
• Manual valve opening and closing possible, in case of a power failure Consult JORC for private labelling options
• Microprocessor controlled (7 day program feature – multiple cycles possible each day) Extended programming features relating to valve open and close cycles (100)
• Slow ball valve rotation 90° in 30 seconds to avoid “water-hammer” when opening or closing Stainless steel ball, valve is nickel plated brass
• Battery saves the Installation set-up during power failure Battery life indication in the display
• Compact design – Easy to install
Part No.: FASV115-1
115 VAC
1″ NPT Inlet & Outlet
230 PSI Max Pressure
The AIR-SAVER 1” is installed in the compressed air line after the air receiver. The AIR-SAVER 1” opens and closes the air supply to the factory, based on customer specific working shifts. A typical compressed air system has air loss through pipe work connections, leaking float type drains, etc.
The AIR-SAVER 1” will open the ball valve at the beginning of a working shift and close the ball valve when the working shift is over. From that point on, all compressed air will remain in the air receiver until the next working shift, rather than being lost through leakages. The clever and versatile programming feature allows for customer specific settings and is totally adaptable to the working hours of each individual factory. The AIR-SAVER 1” can be installed in all pipe line systems up to 2”. Remote switching kits are available to operate the AIR-SAVER 1” from a distance.
• At least one air receiver’s worth of compressed air savings per day
• No unnecessary compressor start-up during periods when compressed air is not required
• Compressor, dryer and filter activities are reduced during factory closing hours Possibility to shut of parts of the pipe line system where compressed air is not needed continuously
• Language selection feature (English, German, Spanish, French and Dutch)
• Each individual day can be programmed according to specific working day shift requirements Time programmed or remote controlled
• Manual valve opening and closing possible, in case of a power failure Consult JORC for private labelling options
• Microprocessor controlled (7 day program feature – multiple cycles possible each day) Extended programming features relating to valve open and close cycles (100)
• Slow ball valve rotation 90° in 30 seconds to avoid “water-hammer” when opening or closing Stainless steel ball, valve is nickel plated brass
• Battery saves the Installation set-up during power failure Battery life indication in the display
• Compact design – Easy to install