Champion R30D Two-Stage Bare Pump 7.5, 10, 15HP, R30

Categories: , ,

CHAMPION R SERIES

MODEL: R30D TWO-STAGE BARE PUMP

AMERICAN MADE

No. of Cylinders: 4
Bore and Stroke (in.): 4-5/8 (2) & 2-1/2 (2) x 3
Flywheel: 18.9 in.
Lubrication: Splash Lubricated
Crankcase: Cast Iron
Bearings: Tapered Roller
Cylinder: Aluminum with Cast Iron Liner
Valves: Disc Valves
Intake Filter: 5 Micron
Max Pressure: 175 PSI
Weight: 220 lbs.

*ONE YEAR LIMITED WARRANTY

 

Your Price:
$3,450.00

All Major Credit Cards Accepted
Quantity:
Share Product:
  • Pictures shown are for illustration purposes only. Actual product may vary due to product specifications.
  • All prices on this website are subject to change without notice. Whilst we make every effort to provide you with the most accurate, up-to-date information, occasionally, one or more items on our website may be mis-priced. In the event a product is listed at an incorrect price due to typographical, photographic, or technical error or error in pricing information received from our manufacturers, Air Power Equipment Co. shall have the right to refuse or cancel any orders placed for product listed at the incorrect price.
Weight 250 lbs
Dimensions 27 × 27 × 35 in

CHAMPION R SERIES

Model: R30D TWO-STAGE BARE PUMP (7.5, 10, 15 HP)

1 Multi-finned cylinders- Cooler operating temperatures result in longer life and consistent performance over time.

2 Integral cylinder/head- Gasket-less design eliminates the possibility of blown head gaskets for trouble-free operation.

3 Balanced pistons- Aluminum alloy first-stage piston is weight matched to the cast iron second-stage piston, ensuring proper balance.

4 Piston rings- Two compression rings and one oil control ring provide excellent oil control, and high efficiency air delivery.

5 Lightweight connecting rods- High-density, die-cast aluminum alloy rods minimize reciprocating weight. An integral, precision- bored crank pin bearing and a needle bearing for the piston pin properly distribute bearing loads for longer bearing life than bushings.

6 Pressure relief valves- Located in interstage and discharge.

7 Intercoolers- Large-diameter finned tubing is positioned to obtain the greatest cooling effect between stages for maximum compressor efficiency.

8 Optimized cooling fan/flywheel- Precision balanced flywheel has fan blades for optimum compressor cooling and life.

9 Reliable, high-flow valves- Single-unit, disc-type valves provide low lift and long life. Discs are made of corrosion resistant Swedish steel. Valves are easily serviced by removing the manifolds only.

10 Over-sized main bearings- Tapered roller-type main bearings provide full contact and support of the crankshaft plus delivers the longest possible life.

11 Balanced crankshaft- Constructed of rugged ductile iron with large diameter throws for minimum bearing loads and counterweights to minimize vibration.

12 Large capacity crankcase- Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain.

13 Loadless starting- Positive acting, governor-type centrifugal unloader assures longer motor life by allowing the compressor to start unloaded every time.

Weight 250 lbs
Dimensions 27 × 27 × 35 in

CHAMPION R SERIES

Model: R30D TWO-STAGE BARE PUMP (7.5, 10, 15 HP)

1 Multi-finned cylinders- Cooler operating temperatures result in longer life and consistent performance over time.

2 Integral cylinder/head- Gasket-less design eliminates the possibility of blown head gaskets for trouble-free operation.

3 Balanced pistons- Aluminum alloy first-stage piston is weight matched to the cast iron second-stage piston, ensuring proper balance.

4 Piston rings- Two compression rings and one oil control ring provide excellent oil control, and high efficiency air delivery.

5 Lightweight connecting rods- High-density, die-cast aluminum alloy rods minimize reciprocating weight. An integral, precision- bored crank pin bearing and a needle bearing for the piston pin properly distribute bearing loads for longer bearing life than bushings.

6 Pressure relief valves- Located in interstage and discharge.

7 Intercoolers- Large-diameter finned tubing is positioned to obtain the greatest cooling effect between stages for maximum compressor efficiency.

8 Optimized cooling fan/flywheel- Precision balanced flywheel has fan blades for optimum compressor cooling and life.

9 Reliable, high-flow valves- Single-unit, disc-type valves provide low lift and long life. Discs are made of corrosion resistant Swedish steel. Valves are easily serviced by removing the manifolds only.

10 Over-sized main bearings- Tapered roller-type main bearings provide full contact and support of the crankshaft plus delivers the longest possible life.

11 Balanced crankshaft- Constructed of rugged ductile iron with large diameter throws for minimum bearing loads and counterweights to minimize vibration.

12 Large capacity crankcase- Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain.

13 Loadless starting- Positive acting, governor-type centrifugal unloader assures longer motor life by allowing the compressor to start unloaded every time.

Related products