Champion VR10-12

Champion R-Series Compressor pumps have a time-tested, proven design. Rugged standard features, a wide selection of configurations, and quality available options make the R-Series compressors the solution to your application. Delivering high performance, long life and tremendous value. Champion compressors are the proven choice!

  • USA Made
  • Disc Valves
  • Rated at 33.8 CFM at 175 PSI, 175 PSI Max
  • 718 Pump RPM
  • Motor Starter Included
  • 3-Year Limited Warranty
  • 895 lbs
  • L– 43’’ W– 30’’ H– 81’’

Freight Paid to any 48 state destination*

Your Price:
$4,595.00

All Major Credit Cards Accepted
Quantity:
Share Product:
Weight 895 lbs
Horsepower

10

CFM

34.8 CFM AT 175 PSI

PSI Configuration

175

Pump Type

Two Stage

Phase Configuration

3

Voltage

230

Tank Size

120

Loaded with rugged features, the R-Series splash-lubricated compressors deliver high performance, long life and tremendous value.

1 Multi-finned cylinders
Cooler operating temperatures result in longer life and consistent performance over time.

2 Integral cylinder/head
Gasketless design eliminates the possibility of blown head gaskets for trouble-free operation.

3 Balanced pistons
Aluminum alloy first-stage piston is weight matched to the cast iron second-stage piston, ensuring proper balance.

4 Piston rings
Two compression rings and one oil control ring provide excellent oil control, and high efficiency air delivery.

5 Lightweight connecting rods
High-density, die-cast aluminum alloy rods minimize reciprocating weight. An integral, precision- bored crankpin bearing and a needle bearing for the piston pin properly distribute bearing loads for longer bearing life than bushings.

6 Pressure relief valves
Located in interstage and discharge.

7 Intercoolers
Large-diameter finned tubing is positioned to obtain the greatest cooling effect between stages for maximum compressor efficiency.

8 Optimized cooling fan/flywheel
Precision balanced flywheel has fan blades for optimum compressor cooling and life.

9 Reliable, high-flow valves
Single-unit, disc-type valves provide low lift and long life. Discs are made of corrosion resistant Swedish steel. Valves are easily serviced by removing the manifolds only.

10 Oversized main bearings
Tapered roller-type main bearings provide full contact and support of the crankshaft plus delivers the longest possible life.

11 Balanced crankshafts
Constructed of rugged ductile iron with large diameter throws for minimum bearing loads and counterweights to minimize vibration.

12 Large capacity crankcase
Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain.

13 Loadless starting
Positive acting, governor-type centrifugal unloader assures longer motor life by allowing the compressor to start unloaded every time.

Many options are available to help you develop a Champion compressor package that exactly matches your specific operating requirements.

*Magnetic starter
For thermal overload protection. Required for units 3 HP and up. May be mounted or unmounted

*Air-cooled or water-cooledaftercooler
The factory mounted, heavy duty, air-cooledaftercooler effectively reduces up to 65% of the moisture from discharged compressed air.

*Automatic tank drain
Pneumatic drain operates from a centrifugal unloader.

*Vibration isolators
Isolates the compressor unit from the foundation or floor. Reduces noise and protects the unit from any out-of-level floor situation that could cause vibration and damage.

*Low oil level monitor
Low Oil Level Monitor shuts down the unit when oil levels are below an adequate level. Prevents the unit from restarting if oil levels are not at an adequate level.

*Refrigerated air dryer
Cools compressed air to a 33o–39o dew point,eliminating additional downstream condensationin the air line. Normally, a dryer should be used inconjunction with an aftercooler. Refrigerated anddesiccant dryer types are available.

*DPR Control Panel
The Microprocessed Duplex Relay Panel wascreated for controlling a duplex air compressorpackage. The controller includes visualmaintenance and shut down alarms.

* Champion Compressor Lubricants
ChampLub lubricants are blended specificallyfor Champion compressors for use in harshcompressor environments. They are sourced fromextremely stable base stocks and enhanced withcarefully selected additive packages to providelong life and superior protection. ChampLublubricants are suitable for a variety of applicationsand are available as a mineral oil, synthetic or food gradesynthetic.Available in 55-gallon drums, five-gallon pails, one gallon
bottles and one-quart bottles.

Other Options
  • Power Monitor that shuts down unit in the eventof single phasing, low voltage or phase reversal
  • Constant Speed Control which prevents excessivemotor start/stop cycles while saving energy
  • Dual Control will allow the compressor to runeither in start/stop or constant speed mode
  • NEMA 4 rated parts available
  • Alternate voltages and TEFC, ODPHE, TEFCHEElectric Motors
Weight 895 lbs
Horsepower

10

CFM

34.8 CFM AT 175 PSI

PSI Configuration

175

Pump Type

Two Stage

Phase Configuration

3

Voltage

230

Tank Size

120

Loaded with rugged features, the R-Series splash-lubricated compressors deliver high performance, long life and tremendous value.

1 Multi-finned cylinders
Cooler operating temperatures result in longer life and consistent performance over time.

2 Integral cylinder/head
Gasketless design eliminates the possibility of blown head gaskets for trouble-free operation.

3 Balanced pistons
Aluminum alloy first-stage piston is weight matched to the cast iron second-stage piston, ensuring proper balance.

4 Piston rings
Two compression rings and one oil control ring provide excellent oil control, and high efficiency air delivery.

5 Lightweight connecting rods
High-density, die-cast aluminum alloy rods minimize reciprocating weight. An integral, precision- bored crankpin bearing and a needle bearing for the piston pin properly distribute bearing loads for longer bearing life than bushings.

6 Pressure relief valves
Located in interstage and discharge.

7 Intercoolers
Large-diameter finned tubing is positioned to obtain the greatest cooling effect between stages for maximum compressor efficiency.

8 Optimized cooling fan/flywheel
Precision balanced flywheel has fan blades for optimum compressor cooling and life.

9 Reliable, high-flow valves
Single-unit, disc-type valves provide low lift and long life. Discs are made of corrosion resistant Swedish steel. Valves are easily serviced by removing the manifolds only.

10 Oversized main bearings
Tapered roller-type main bearings provide full contact and support of the crankshaft plus delivers the longest possible life.

11 Balanced crankshafts
Constructed of rugged ductile iron with large diameter throws for minimum bearing loads and counterweights to minimize vibration.

12 Large capacity crankcase
Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain.

13 Loadless starting
Positive acting, governor-type centrifugal unloader assures longer motor life by allowing the compressor to start unloaded every time.

Many options are available to help you develop a Champion compressor package that exactly matches your specific operating requirements.

*Magnetic starter
For thermal overload protection. Required for units 3 HP and up. May be mounted or unmounted

*Air-cooled or water-cooledaftercooler
The factory mounted, heavy duty, air-cooledaftercooler effectively reduces up to 65% of the moisture from discharged compressed air.

*Automatic tank drain
Pneumatic drain operates from a centrifugal unloader.

*Vibration isolators
Isolates the compressor unit from the foundation or floor. Reduces noise and protects the unit from any out-of-level floor situation that could cause vibration and damage.

*Low oil level monitor
Low Oil Level Monitor shuts down the unit when oil levels are below an adequate level. Prevents the unit from restarting if oil levels are not at an adequate level.

*Refrigerated air dryer
Cools compressed air to a 33o–39o dew point,eliminating additional downstream condensationin the air line. Normally, a dryer should be used inconjunction with an aftercooler. Refrigerated anddesiccant dryer types are available.

*DPR Control Panel
The Microprocessed Duplex Relay Panel wascreated for controlling a duplex air compressorpackage. The controller includes visualmaintenance and shut down alarms.

* Champion Compressor Lubricants
ChampLub lubricants are blended specificallyfor Champion compressors for use in harshcompressor environments. They are sourced fromextremely stable base stocks and enhanced withcarefully selected additive packages to providelong life and superior protection. ChampLublubricants are suitable for a variety of applicationsand are available as a mineral oil, synthetic or food gradesynthetic.Available in 55-gallon drums, five-gallon pails, one gallon
bottles and one-quart bottles.

Other Options
  • Power Monitor that shuts down unit in the eventof single phasing, low voltage or phase reversal
  • Constant Speed Control which prevents excessivemotor start/stop cycles while saving energy
  • Dual Control will allow the compressor to runeither in start/stop or constant speed mode
  • NEMA 4 rated parts available
  • Alternate voltages and TEFC, ODPHE, TEFCHEElectric Motors