FS-Curtis Masterline ML30 30hp UltraPack Skid Mounted Air Compressor

Free Freight!

Curtis Masterline Ultra Pack Air Compressor Unit 30hp, 3-phase 230-volt factory wired. Can be wired for 460volt. 2-Stage with a Baldor 30hp Premium Efficiency Electric Motor Skid Mounted with a 120-Gallon Vertical Tank

  • 5-year limited warranty, Bumper to Bumper
  • American Made, Pressure Lubricated
  • Rated at 102cfm at 175psi

8-10 Week Lead Time

Share Product:
  • Pictures shown are for illustration purposes only. Actual product may vary due to product specifications.
  • All prices on this website are subject to change without notice. Whilst we make every effort to provide you with the most accurate, up-to-date information, occasionally, one or more items on our website may be mis-priced. In the event a product is listed at an incorrect price due to typographical, photographic, or technical error or error in pricing information received from our manufacturers, Air Power Equipment Co. shall have the right to refuse or cancel any orders placed for product listed at the incorrect price.
Horsepower

30

CFM

102 CFM AT 175 PSI

PSI Configuration

175

Voltage

200, 230, 460

Pump Type

Two Stage

Phase Configuration

3

Tank Size

120

Curtis Masterline Ultra Pack Air Compressor Unit 30hp, 3-phase 230-volt factory wired. Can be wired for 460volt. 2-Stage with a Baldor 30hp Premium Efficiency Electric Motor Skid Mounted with a 120-Gallon Vertical Tank

  • 5-year limited warranty, Bumper to Bumper
  • American Made, Pressure Lubricated
  • Rated at 102cfm at 175psi

Masterline (ML Series) is the most robust, heavy duty reciprocating air compressor lineup available. The perfect combination of quality components and efficient design make the ML Series rugged, affordable and smart. Because every model is built tough to last a lifetime in demanding working conditions, the ML Series is an outstanding alternative to splash-lubricated reciprocating compressors and small rotary compressors.

1. INTERCOOLER RELIEF VALVE Prevents excessive pressure in the low pressure cylinder and intercooler, protecting pump and motor.

2. LOADLESS STARTINGWith centrifugal, suction valve, or bleeder type unloader.

3. STAINLESS STEEL DISC AND SPRING VALVE ASSEMBLIESLargest in the industry, ground and lapped to optical flatness for quiet and efficient operation.

4. DEEP FINNED CYLINDERS – Permit better cooling.

5. INTERCOOLERExtra long with radiating fins located in the cyclone of air from the flywheel, providing maximum heat dissipation.

6. CAST IRON HIGH PRESSURE PISTONSFor durability and long life.

7. BALANCED FLYWHEEL – Provides effective air blast to cool compressor.

8. HEAVY DUTY CAST IRON CONNECTING RODS – Heaviest in the industry with replaceable rod bearings and pin bearings.

9. CAST IRON CRANKCASE – For strength and durability.

10. HEAVY DUTY DUCTILE IRON CRANKSHAFT – Ground and counter balanced with rifle-drilled oil flow ports.

11. OVERSIZED TAPERED MAIN ROLLER BEARINGS – Adjustable to assure long life with less friction.

12. PRESSURE LUBRICATION – With our centro-ring oiling system, pressurized oil is supplied internally through rifle-drilled crankshaft and rods to all bearings, bushings, and wearing surfaces for extended pump life.

Ultra Pack Series Includes:
  • Magnetic Motor Starter
  • Low Oil Safety Shutdown Switch
  • Automatic Tank Drain
  • Air Cooled AfterCooler (REMOVES UP TO 70% OF MOISTURE FROM SYSTEM)
  • Vibration Isolators
Horsepower

30

CFM

102 CFM AT 175 PSI

PSI Configuration

175

Voltage

200, 230, 460

Pump Type

Two Stage

Phase Configuration

3

Tank Size

120

Curtis Masterline Ultra Pack Air Compressor Unit 30hp, 3-phase 230-volt factory wired. Can be wired for 460volt. 2-Stage with a Baldor 30hp Premium Efficiency Electric Motor Skid Mounted with a 120-Gallon Vertical Tank

  • 5-year limited warranty, Bumper to Bumper
  • American Made, Pressure Lubricated
  • Rated at 102cfm at 175psi

Masterline (ML Series) is the most robust, heavy duty reciprocating air compressor lineup available. The perfect combination of quality components and efficient design make the ML Series rugged, affordable and smart. Because every model is built tough to last a lifetime in demanding working conditions, the ML Series is an outstanding alternative to splash-lubricated reciprocating compressors and small rotary compressors.

1. INTERCOOLER RELIEF VALVE Prevents excessive pressure in the low pressure cylinder and intercooler, protecting pump and motor.

2. LOADLESS STARTINGWith centrifugal, suction valve, or bleeder type unloader.

3. STAINLESS STEEL DISC AND SPRING VALVE ASSEMBLIESLargest in the industry, ground and lapped to optical flatness for quiet and efficient operation.

4. DEEP FINNED CYLINDERS – Permit better cooling.

5. INTERCOOLERExtra long with radiating fins located in the cyclone of air from the flywheel, providing maximum heat dissipation.

6. CAST IRON HIGH PRESSURE PISTONSFor durability and long life.

7. BALANCED FLYWHEEL – Provides effective air blast to cool compressor.

8. HEAVY DUTY CAST IRON CONNECTING RODS – Heaviest in the industry with replaceable rod bearings and pin bearings.

9. CAST IRON CRANKCASE – For strength and durability.

10. HEAVY DUTY DUCTILE IRON CRANKSHAFT – Ground and counter balanced with rifle-drilled oil flow ports.

11. OVERSIZED TAPERED MAIN ROLLER BEARINGS – Adjustable to assure long life with less friction.

12. PRESSURE LUBRICATION – With our centro-ring oiling system, pressurized oil is supplied internally through rifle-drilled crankshaft and rods to all bearings, bushings, and wearing surfaces for extended pump life.

Ultra Pack Series Includes:
  • Magnetic Motor Starter
  • Low Oil Safety Shutdown Switch
  • Automatic Tank Drain
  • Air Cooled AfterCooler (REMOVES UP TO 70% OF MOISTURE FROM SYSTEM)
  • Vibration Isolators