HR15-12 Advantage

Champion Advantage Series 15hp 120-Gallon Horizontal Air Compressor Unit 2-Cylinder R40 Pump with Disc Valves, Includes Magnetic Motor Starter, Aftercooler (removes up to 60% moisture), Auto Tank Drain, Low Oil Guard and Vibration Isolator

  • USA Made
  • Disc Valves
  • Rated at 54.1cfm at 175psi, 175psi Max
  • 776 Pump RPM
  • Motor Starter Included
  • 3-Year Limited Warranty
  • 1210lbs
  • L– 73’’ W– 36’’ H– 62’’

Freight Paid to any 48 state destination*

$6,512.07

Clear

Description

Champion R-Series Compressor pumps have a time-tested, proven design. Rugged standard features, a wide selection of configurations, and quality available options make the R-Series compressors the solution to your application. Delivering high performance, long life and tremendous value. Champion compressors are the proven choice!

  • USA Made
  • Disc Valves
  • Rated at 54.1cfm at 175psi, 175psi Max
  • 776 Pump RPM
  • Motor Starter Included
  • 3-Year Limited Warranty
  • 1210lbs
  • L– 73’’ W– 36’’ H– 62’’

Freight Paid to any 48 state destination*

 

Features

Multi-finned Cylinders Cooler temperatures result in longer life and consistent performance over time. Integral Cylinder/head Gasket-less design eliminates the possibility of blown head gaskets for trouble-free operation. Balanced Pistons Aluminum alloy first-stage piston is weight-matched to the cast iron second-stage piston, ensuring proper balance. Piston Rings: Three compression rings and one oil control ring provide excellent oil control, minimum blow-by and high efficiency air delivery. Lightweight Connecting Rods High-density, die-cast aluminum alloy rods minimize reciprocating weight. An integral precision-bored crank pin bearing and a needle bearing for the piston pin properly distribute bearing loads for longer bearing life than bushings. Pressure Relief Valves Located in interstage and discharge. Intercoolers Large-diameter finned tubing is positioned to obtain the greatest cooling effect between stages for maximum compressor efficiency. Optimized Cooling Fan/flywheel Precision balanced fly wheel has fan blades for optimum compressor cooling and life. Reliable, High-flow Valves Single-unit, disc-type valves provide low lift and long life. Discs are made of corrosion resistant Swedish steel. Valves are easily serviced by removing the manifolds only. Over-sized Main Bearings Tapered roller-type main bearings deliver the longest possible life. Balanced Crankshaft Constructed of rugged ductile iron with large diameter throws for minimum bearing loads and counterweights to minimize vibration. Large Capacity Crankcase Rugged cast iron oil reservoir has convenient sight gauge glass, corner oil fill boss and large oil drain. Load-less Starting Positive acting, governor-type centrifugal unloader assures longer motor life by allowing the compressor to start unloaded every time.

 

Options Included

  • Mounted magnetic starter
  • Belt Guard Aftercooler
  • Electric Auto Tank Drain
  • Low Oil Switch
  • Vibration Isolators

 

*Free freight is dropped shipped from the Champion factory direct to your 48 State Destination This does not include liftgate service or inside delivery.

Additional information

Weight 1210 lbs
HP

15

PSI Configuration

175

Phase Configuration

3

Voltage

200, 230