FS-Curtis CT14K 14HP Kohler Gas Engine, 30 Gallon Tank 2-Stage Air Compressor FCTKDC75H3X-AXL1XX

  •  FCTKDC75H3X-AXL1XX
  • 14 HP Kohler CT75
  • Rated at 25.4 CFM at 175 PSI, 175 PSI Max
  • 907 Pump RPM
  • 3-Year Limited Warranty
  • 478 lbs
  • L– 50’’ W– 24’’ H– 43’’

*Free freight is drop-shipped from the factory direct to your 48 State Destination. This does not include liftgate service or residential delivery.

Your Price:
$4,322.00

All Major Credit Cards Accepted
Quantity:
Share Product:
  • Pictures shown are for illustration purposes only. Actual product may vary due to product specifications.
  • All prices on this website are subject to change without notice. Whilst we make every effort to provide you with the most accurate, up-to-date information, occasionally, one or more items on our website may be mis-priced. In the event a product is listed at an incorrect price due to typographical, photographic, or technical error or error in pricing information received from our manufacturers, Air Power Equipment Co. shall have the right to refuse or cancel any orders placed for product listed at the incorrect price.
Weight 486 lbs
Horsepower

14

CFM

25.4 CFM at 175 PSI

PSI Configuration

175

Tank Size

30

Pump Type

Two Stage

  •  FCTKDC75H3X-AXL1XX
  • 14 HP Kohler CT75
  • Rated at 25.4 CFM at 175 PSI, 175 PSI Max
  • 907 Pump RPM
  • 3-Year Limited Warranty
  • 478 lbs
  • L– 50’’ W– 24’’ H– 43’’
CT Series Features At a Glance

100% Cast-Iron Cylinders, Cylinder Heads Connecting Rods, And High Pressure Pistons – More Cast-Iron For Longer Service Life.

  • TWO-STAGE CAST-IRON PUMP IS SIGNIFICANTLY MORE DURABLE THAN PUMPS WITH ALUMINUM COMPONENTS
  • DEEP-FINNED CAST-IRON CYLINDERS AND HEADS FOR COOL OPERATION
  • INDUSTRY-LEADING CAST-IRON CYLINDERS HIGH-PRESSURE PISTONS FOR EXTREME DURABILITY
  • DUCTILE IRON CRANKSHAFT IS STRONGER, MORE CORROSION-RESISTANT AND LESS LIKELY TO BREAK
Quality Components – Built to last for superior compressor life.
  • Oil drain extension and belt tensioning bolt have been installed with service in mind.
  • HIGH-FLOW, HEAVY-DUTY STAINLESS STEEL CHANNEL VALVE SYSTEM DELIVERS MORE CFM PER HORSEPOWER
  • PRECISION-FIT, INDUSTRIAL-GRADE MAIN ROLLER BEARINGS SUPPORT ALL ROTATING PARTS FOR LONGER PUMP LIFE
  • ROBUST INTERCOOLER INCREASES COMPRESSOR EFFICIENCY
  • OIL LEVEL SIGHT GLASS IS CONVENIENTLY LOCATED FOR EASY MONITORING
  • METAL INTAKE FILTER/SILENCER IS SUPERIOR TO PLASTIC
Value-Minded Industrial Design – Robust Performance At A Lower Cost.
  • PROVIDES HIGHER PRESSURES AND LONGER LIFE THAN SINGLE-STAGE PUMPS
  • FOLLOWS THE SAME WORLD-CLASS QUALITY DESIGN STANDARDS AS OTHER FS-CURTIS PRODUCTS
  • SLOW TURNING PUMP INCREASES PUMP LIFE
  • ROBUST DESIGN SETS THE CT SERIES APART FROM COMPARABLE ENTRY-LEVEL MODELS
Standard Features
  • Heavy-Duty 100% cast iron pump construction for dependable operation
  • Slow speed design for extended life
  • OSHA-approved totally enclosed metal belt guard
  • ASME-approved air receiver
  • 12V DC starter with alternator
  • Engine idle control
  • ASME-approved discharge valve
Weight 486 lbs
Horsepower

14

CFM

25.4 CFM at 175 PSI

PSI Configuration

175

Tank Size

30

Pump Type

Two Stage

  •  FCTKDC75H3X-AXL1XX
  • 14 HP Kohler CT75
  • Rated at 25.4 CFM at 175 PSI, 175 PSI Max
  • 907 Pump RPM
  • 3-Year Limited Warranty
  • 478 lbs
  • L– 50’’ W– 24’’ H– 43’’
CT Series Features At a Glance

100% Cast-Iron Cylinders, Cylinder Heads Connecting Rods, And High Pressure Pistons – More Cast-Iron For Longer Service Life.

  • TWO-STAGE CAST-IRON PUMP IS SIGNIFICANTLY MORE DURABLE THAN PUMPS WITH ALUMINUM COMPONENTS
  • DEEP-FINNED CAST-IRON CYLINDERS AND HEADS FOR COOL OPERATION
  • INDUSTRY-LEADING CAST-IRON CYLINDERS HIGH-PRESSURE PISTONS FOR EXTREME DURABILITY
  • DUCTILE IRON CRANKSHAFT IS STRONGER, MORE CORROSION-RESISTANT AND LESS LIKELY TO BREAK
Quality Components – Built to last for superior compressor life.
  • Oil drain extension and belt tensioning bolt have been installed with service in mind.
  • HIGH-FLOW, HEAVY-DUTY STAINLESS STEEL CHANNEL VALVE SYSTEM DELIVERS MORE CFM PER HORSEPOWER
  • PRECISION-FIT, INDUSTRIAL-GRADE MAIN ROLLER BEARINGS SUPPORT ALL ROTATING PARTS FOR LONGER PUMP LIFE
  • ROBUST INTERCOOLER INCREASES COMPRESSOR EFFICIENCY
  • OIL LEVEL SIGHT GLASS IS CONVENIENTLY LOCATED FOR EASY MONITORING
  • METAL INTAKE FILTER/SILENCER IS SUPERIOR TO PLASTIC
Value-Minded Industrial Design – Robust Performance At A Lower Cost.
  • PROVIDES HIGHER PRESSURES AND LONGER LIFE THAN SINGLE-STAGE PUMPS
  • FOLLOWS THE SAME WORLD-CLASS QUALITY DESIGN STANDARDS AS OTHER FS-CURTIS PRODUCTS
  • SLOW TURNING PUMP INCREASES PUMP LIFE
  • ROBUST DESIGN SETS THE CT SERIES APART FROM COMPARABLE ENTRY-LEVEL MODELS
Standard Features
  • Heavy-Duty 100% cast iron pump construction for dependable operation
  • Slow speed design for extended life
  • OSHA-approved totally enclosed metal belt guard
  • ASME-approved air receiver
  • 12V DC starter with alternator
  • Engine idle control
  • ASME-approved discharge valve