FS-Curtis C89A, Two-Stage Bare Pump

Categories: ,

*DOES NOT QUALIFY FOR FREE FREIGHT

FS-CURTIS Masterline C89 15-20HP 2-Stage Bare Air Compressor Pump With APU (HEAD UNLOADER) Cast Iron, USA Made
Part Number: FMLC89
CFM: 55-65CFM AT 175PSI
Warranty: 1-Year Limited

$5,099.94

Description

*DOES NOT QUALIFY FOR FREE FREIGHT

FS-CURTIS Masterline C89 15-20HP 2-Stage Bare Air Compressor Pump With APU (HEAD UNLOADER) Cast Iron, USA Made
Part Number: FMLC89
CFM: 55-65CFM AT 175PSI
Warranty: 1-Year Limited

Pump Technical Data:

Model: C89A

Stage: 2

Lubrication type: Centro-Ring Pressure Lubrication

Oil quantity: 5 Pints

Valve type: Disc Valve

RPM (min – max): rpm  600-950

Pressure Range (min-max): PSI 80-250

HP (min – max): 10-20

Bore (LP/HP): 7” – 3.375”

Stroke: 3.75”

Inlet size: 1 1/2″ NPT

Discharge size: 1 1/2″ NPT

Sheave OD: 17.875”

Sheave PD: 17.52”

Number of belts: 3B

Low oil sight glass: Dip Stick

Unloaders and Method: Suction Head

Noise level: dB(A)  85

Compressor Bearings

Crankshaft Main Bearings: Tapered Roller

Connecting Rod Bearings: Journal

Wrist Pin Bearings: Needle

Installation condition

Allowed ambient temperature min – max – °F: 32-104

Compressor dimensions

Compressor outlet: 1 1/2″ NPT

Length: 18″

Width: 22″

Height: 27″

Weight: 440 lbs

Remark: 1. Capacity (FAD) measured in accordance with ISO 1217, Ed 3, Attachment C 1996, Ref. condition: Dry air, suction pressure 1 bar. 2. Sound Pressure Level in accordance with ISO 2151, edition 2004 with a tolerance of 3dB(A).

 

Masterline (ML Series) is the most robust, heavy duty reciprocating air compressor lineup available. The perfect combination of quality components and efficient design make the ML Series rugged, affordable and smart. Because every model is built tough to last a lifetime in demanding working conditions, the ML Series is an outstanding alternative to splash-lubricated reciprocating compressors and small rotary compressors.

 

1. INTERCOOLER RELIEF VALVE – Prevents excessive pressure in the low pressure cylinder and intercooler, protecting pump and motor.2. LOADLESS STARTING – With centrifugal, suction valve, or bleeder type unloader.

3. STAINLESS STEEL DISC AND SPRING VALVE ASSEMBLIES – Largest in the industry, ground and lapped to optical flatness for quiet and efficient operation.

4. DEEP FINNED CYLINDERS – Permit better cooling.

5. INTERCOOLER – Extra long with radiating fins located in the cyclone of air from the flywheel, providing maximum heat dissipation.

6. CAST IRON HIGH PRESSURE PISTONS – For durability and long life.

7. BALANCED FLYWHEEL – Provides effective air blast to cool compressor.

8. HEAVY DUTY CAST IRON CONNECTING RODS – Heaviest in the industry with replaceable rod bearings and pin bearings.

9. CAST IRON CRANKCASE – For strength and durability.

10. HEAVY DUTY DUCTILE IRON CRANKSHAFT – Ground and counter balanced with rifle-drilled oil flow ports.

11. OVERSIZED TAPERED MAIN ROLLER BEARINGS – Adjustable to assure long life with less friction.

12. PRESSURE LUBRICATION – With our centro-ring oiling system, pressurized oil is supplied internally through rifle-drilled crankshaft and rods to all bearings, bushings, and wearing surfaces for extended pump life.

Additional information

Weight 480 lbs