Air Compressor Check Valve In Stock | Air Power Equipment Company
16727
page-template-default,page,page-id-16727,mt-16727,mt-page-check-valve,ajax_fade,page_not_loaded,,qode-child-theme-ver-1.0.0,qode-theme-ver-7.4,wpb-js-composer js-comp-ver-5.1.1,vc_responsive
 

Check Valves

Air Compressor Check Valve

In Tank Check Valve

P3838T 3/8” x 3/8”

P3850T 3/8” x 1/2”

P5050T 1/2” x 1/2”

P5075T 1/2” x 3/4”

P7575T 3/4” x 3/4” Most Common for 2-Stage 80-Gallon

P7510T 3/4” x 1”

P7515 3/4” x 1-1/2”

P1010T 1” x 1”

P1212T 1-1/4” x 1-1/4”

P1515T 1-1/2” x 1-1/2”

  • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
  • Valves are 100% Tested for Backflow Leakage Performance
  • 1 PSI Cracking Pressure
  • Maximum Pressure: 500 PSI
  • Maximum Temperature: 450 F
  • 2 – 1/8 NPT Tapped Ports are Standard
  • Everseal 483 Sealant Standard

In Tank Check Valve with Compression Threads

C3838 3/8” x 3/8”

C3850 3/8” x 1/2”

C5038TA 1/2” x 3/8”

C5050T 1/2” x 1/2”

C7550T 3/4” x 1/2”

C7575T 3/4” x 3/4”

C7510T 3/4” x 1”

  • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
  • Valves are 100% Tested for Backflow Leakage Performance
  • 1 PSI Cracking Pressure
  • Maximum Pressure: 500 PSI
  • Maximum Temperature: 450 F
  • 1/8 NPT Tapped Port is Standard
  • Everseal 483 Sealant Standard

In Tank Check Valve with JIC Flared Threads

F5050T 1/2” x 1/2”

F7575T  3/4” x 3/4”

  • Construction: C360 Machined Brass Outlet, Plated Steel Tank End, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
  • Valves are 100% Tested for Backflow Leakage Performance
  • 1 PSI Cracking Pressure
  • Maximum Pressure: 500 PSI
  • Maximum Temperature: 450 F
  • 1/8 NPT Tapped Port is Standard
  • Everseal 483 Sealant Standard

Inline Cast Brass Check Valve

CB08 1/8” Female Pipe Threads (FPT)

CB25 1/4” FPT

CB38 3/8” FPT

CB50 1/2” FPT

CB75 3/4” FPT

CB10 1” FPT

CB12 1-1/4” FPT

CB15 1-1/2” FPT

CB20 2″ FPT

  • Applications: Air Compressor Discharge Lines
  • Pressure Range: 250 psi
  • Maximum Temperature: 450 F
  • Cracking Pressure: 3 PSI
  • Construction: Extra Heavy Cast Brass Body
  • Glass Filled Fluoropolymer Poppets and
  • Corrosion Resistant Stainless Steel Springs to
  • Ensure Long Life
  • A Plugged 1/8 NPT Unloader Port is Standard

Inline Vertical Check Valve

CLB25P 1/4” Female Pipe Thread (FPT)

CLB38P 3/8” FPT

CLB50P 1/2” FPT

CLB75P 3/4” FPT

CLB10P 1” FPT

CLB15P 1-1/2” FPT

  • Applications: Compressor Applications Where an In Tank Check Valve Will Not Fit, the Valve Can Conveniently be Installed Right in the Discharge Line of the Compressor
  • Construction: C360 Machined One Piece Brass Body, 302 Stainless Steel Spring and 15% Glass Filled Teflon Poppet
  • 1 PSI Cracking Pressure
  • A Plugged 1/8 NPT Unloader Port is Standard
  • Maximum Pressure: 500 PSI
  • Maximum Temperature: 450 F

Load Genie Self Unloading Check Valve

CA-6 3/8” x 1/4” Compression x Male Pipe Thread (MPT)

CA-12 1/2” x 3/8” Compression x MPT

CA-24 3/4” x 1/2” Compression x MPT

CA-48 3/4” x 3/4” Compression x MPT

 

A Compressor Running in a Start/Stop Mode Operates More Efficiently if the Pressure Trapped in the Compressor Head and Discharge Line is Released After Each Pump-Up Control Cycle. This Allows for a Smoother Start and the Use of a Motor With Lower Starting Torque. The Most Convenient Way to Release this Trapped Pressure is to Use the Load Genie Combination Check and Unloader Valve. Install the Valve in the Compressor Discharge Line and the Load Genie Will Do the Rest.

Maximum Pressure 250 PSI

Air Power Equipment OKC - Air Compressor Check Valve